User manual SONY KP-53S65

[. . . ] This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Cycles through the video equipment connected to your projection TV's video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7. Press 0 - 9 to select a channel, the channel changes after 2 seconds. For details, see "Using Twin ViewTM" on page 44. GUIDE qk MENU ql CH +/­ Displays the program guide of your satellite. Press to display the projection TV on-screen menu. Scan through channels. qh 0 ­ 9 and ENTER qj w; DRC/ Press repeatedly to step through the available highCINEMOTION resolution picture modes: Interlaced, Progressive and CineMotion. For details, see "Using the Video Menu" on page 52. wa WIDE MODE Press to step through the wide screen modes: Wide Zoom, Normal, Full and Zoom. For details, see "Using Wide Mode" on page 50. z To scan rapidly through the channels, press and hold down CH+ or CH­. 38 Using the Features Inside Panel Button Description 1 SYSTEM OFF Press to turn off the projection TV and all equipment connected with S-Link. 2N 3m 4 REC 5x 6 DVD MENU 7 MTS/SAP 8 CODE SET Play Rewind Record Using the Features Stop Displays the DVD menu. Press to scroll through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP, and Mono. (for details, see page 28) Press TV/VIDEO to select VIDEO 5, 6 or 7. Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. Adjust the volume of the projection TV as necessary. 42 Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. To display a list of your favorite channels: Your Favorite Channel options can be set automatically or manually. The factory setting for Favorite Channel is Auto. When Favorite Channel is set to Auto, the last eight channels selected with 0-9 buttons will be set as Favorite Channel options. If you want to input your own selections as Favorite Channel settings, see "Favorite Channel" on page 56. The Favorite Channel options appear. Preview window Favor ites 124 6 10 12 2 8 8 4 Exit Using the Features 1 2 Move the joystick up or down to highlight the channel you want to watch. The program of that channel appears in the preview window. Press to select. 43 Using the Features Using Twin ViewTM Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Activating Twin Pictures To display twin pictures 1 2 Make sure your projection TV is tuned to a working channel. [. . . ] Then press TV (FUNCTION) and adjust the projection TV's volume. Make sure Cable is set to On in the Channel menu (see "Cable" on page 56). Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 57). Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 57). [. . . ]