User manual SONY KP-53V16

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] You can quickly change Sound mode without entering the Sound Control menu screen. Push the joystick to $ or 4 to select your desired sound mode (Personal, Rock, Jazz or Pop), then press the OK button to remove the display from the screen. Note: this function will not work in digital text mode or when viewing a channel which broadcasts digital text. In those instances please use the menu system as described above. You can select a time period for the TV to switch itself automatically into the standby mode. Push the joystick to $ button to select the t symbol, then push to z to enter to the TIMER menu. Push the joystick to z, then push to Z or z repeatedly to set the time period delay Off z 0:30 z 1:00. One minute before the projection TV switches into standby mode, the indication 0:01 is displayed on the screen automatically. To return to normal operation from standby mode, press the TV button on the remote control. Use this function to preset channels or a video input source one by one to the programme order of your choice. Symbol, then push to z to enter Push the joystick to $ or 4 to select Manual Programme Preset, then push to z. When you select a named channel, the name appears for a few seconds on the screen. With this feature you can view subtitles (if available) on the TV screen when watching digital channels. When watching analogue channels you can view subtitles via teletext. Symbol, then push to z to enter Push the joystick to $ or 4 to select Digital Subtitles, then push to z . Push the joystick to Z or z to select the language in which you wish the subtitles to appear. You can choose from English, Welsh or Gaelic. When you wish to cancel subtitles, set to Off. When you select a digital channel which broadcasts subtitles, the subtitles appear on the bottom of the screen in the chosen language. Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV connectors :2 or :3 placed on the rear of the projection TV. In that case you have to select the output source as described below (if your VCR support Smartlink, this procedure is not necessary). Push the joystick to $ to select the symbol, then push to z button to enter to the VIDEO CONNECTION menu screen. [. . . ] refer to the "Adjusting the Sound" section of this instruction manual and set the option "Speaker" to "Centre in". Remember that the maximum input level of this input is 30 W. For mono equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on this page below. Finally, refer to the "Adjusting the Sound" section of this manual and select "A" on the sound menu screen. [. . . ]