User manual SONY KP-61V90

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Push the joystick to $ or 4 to select the system for TV Broadcast and VCR channel (B/G for western european countries, L for France, I for Great Britain or D/K for eastern european countries) or a external input source (EXT), then push to z. Push the joystick to $ or 4 to select the channel tuning, "C" for terrestrial channels (for TV Broadcast or VCR channel), "S" for cable channels or F for, direct frequency input then push to z. A) If you know the channel number of the TV Broadcast, the VCR test signal channel or the frequency, press the number buttons to enter directly the channel number. You can, however, still select them using the number buttons. With this feature you can: a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture). B) Individually adjust the volume level of each channel. C) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture reception if the picture is distorted. D) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a connected VCR records the unscrambled signal. Push the joystick to $ to select the enter the Set Up menu. Push the joystick to $ or 4 to select Manual Set Up then push to z to enter. You will not be able to select and change this option. This function provides an overview of some of the features available on your projection TV. Push the joystick to $ to select the enter the Set Up menu. Push the joystick to $ or 4 to select Manual Set Up, then push to z. Push to $ or 4 to select Demo, then push to z to enter and start the demonstration. The projection TV starts the demonstration and shows most of the available picture functions. When connecting an RGB source, such as a DVD player, to the Scart connector :1/ of the picture. You may need to readjust the geometry Push the joystick to $ to select the enter the Set Up menu. Push to $ or 4 to select Manual Set Up then push to z to enter. Push the joystick to $ or 4 to select RGB Set Up then push to z. Push the joystick to z to enter H Centre, then push to $ or 4 to adjust the centre of the picture over a range of -10 to +10. [. . . ] Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk Use the buttons underneath the cover on the remote control to operate the equipment. â· If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the projection TV Remote Control. â· If the equipment does not have a certain function, the corresponding button on the remote control will not work. [. . . ]