User manual SONY KP-XA43M91

[. . . ] To prevent fire or shock hazard, do not expose the projection TV to rain or moisture. Dangerously high voltages are present inside the projection TV. Do not expose the projection TV to rain or moisture. Do not install the projection TV where it may be exposed to mechanical vibrations. [. . . ] After 20-30 minutes of turning on the power, adjust convergence. Press V or v to move the cursor (z) to the symbol showing the line you want to adjust, and press ENTER. Red vertical line (left/right adjustment) Red horizontal line (up/down adjustment) Blue vertical line (left/right adjustment) Blue horizontal line (up/down adjustment) The auto convergence function works for about 30 seconds. Press V or v to move the line until it converges with the center green line, and press ENTER. When the auto convergence function does not work correctly with , adjust convergence by selecting CONVERGENCE of the FEATURES menu. Repeat steps 4 and 5 to adjust the other lines until all three lines converge and are seen as a white cross. To scan through program positions Press PROGR +/­ on the remote commander or the TV until the program position you want appears. When the TV is turned on in the standby mode, the u/Â indicator on the TV lights up. To turn on the TV completely, press u on the remote commander. To turn off the TV completely Press U on the TV. To watch TV Press ; on the remote commander or . The on-screen display shows the program position or the video mode, the picture and sound information. The on-screen display for the picture and sound information disappears after being displayed for approximately three seconds. You can set the TV to turn off automatically after the period of time you want. To cancel the Sleep Timer, press repeatedly until "SLEEP TIMER: OFF" appears, or turn the TV off. Adjusting the picture and sound You can adjust the picture settings to suit your taste with the VIDEO ADJUST option. Selecting the picture and sound modes Press V or v to move the cursor (") to the item you want to adjust, and press ENTER. To adjust other items, repeat steps 4 and 5. Receive normal contrast picture with medium listening sound. Receive the last picture and sound settings that are adjusted using VIDEO ADJUST and AUDIO ADJUST. *: Each time you press V/b/v/B, the picture changes as follows: If the picture is slightly snowy You may try to improve the picture by changing the VM setting as described below: 1 2 3 Display the VIDEO ADJUST menu. To adjust other items, repeat steps 4 and 5. [. . . ] A Teletext page may consist of several subpages. If you press the GAME button when the TV is in the standby mode, the TV turns on automatically and the picture and sound change to the mode that is suitable for video games. To display a video game screen, connect the video game equipment to the . The picture and sound change to the mode that is suitable for video games. [. . . ]