User manual SONY KP-41T65

[. . . ] Shaded buttons on the remote control show the buttons you have to press to follow the sequence of instructions. informs you of the result of the instructions. The process continues on the next page to get final result. To prevent fire or electric shock, please follow the safety procedures indicated below. [. . . ] : red vertical line (left/right adjustment) : red horizonta line (up/down adjustment) : blue vertical line (left/right adjustment) : blue horizontal line (up/down adjustment) Then press the OK button. Push the joystick repeatedly to $, 4, Z or z to converge the selected line with the green line in the centre, then press OK to confirm. Repeat steps 4 and 5 to adjust the other lines, until all the lines have overlapped to form a white cross. Besides the explanation in the section "Automatically Tuning the TV using the Remote Control", by following the instructions below, this projection TV also searches and stores automatically all available channels using just one button of the projection TV set and one button of the remote control. Press the flap on the front of the projection TV by pressing on the mark to reveal the front control panel. Press and hold in the button on the TV set for some seconds, until a menu appears automatically on the screen asking you to check that antenna is connected. Please, be patient and do not press any button. When the automatic tuning procedure is complete, the Programme Sorting menu appears on the screen: · If you do not wish to change the channel order, press the MENU button on the remote control to exit and return to the normal TV screen. ⷠIf you wish to change the channel order, proceed in the same way as described in the chapter "Changing the Programme Order of the TV channels", section b). Use this function to preset channels or a video input source one by one to the programme order of your choice. Push the joystick to $ to select the enter to the PRESET menu. The symbol appears before the programme position to indicate this programme is now blocked. Repeat step 4 if you wish to block other channels. When you select a blocked programme the screen appears in black, with symbol. You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate TV system (B/G or D/K) instead of "- - -" in step 5. Push the joystick to $ to select the enter to the PRESET menu. Push the joystick to $ or 4 to select Manual Programme Preset, then push to z. Push the joystick to $ or 4 to select the programme position you want to skip, then push to z to enter to the SYS column. Push the joystick to $ to select "- - -", then press the OK button to store. Repeat steps 4 and 5 to skip other unused programme positions. When changing channels (TV Broadcasts) with the PROGR +/- buttons, the skipped programme positions do not appear. [. . . ] If you have connected a decoder to a VCR which supports Smartlink feature, select the menu Further Programme Preset in the (PRESET) menu and select DECODER AV3 to each codified channel. For more details, please refer to the section "Using the Further Programme Preset function" of this instruction manual. For more information on Smartlink, please refer to the Instruction Manual of your VCR. Using the buttons underneath the cover of the remote control you can control other Sony equipment. [. . . ]