User manual SONY KP-46S55

[. . . ] For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall into the cabinet, do not operate the TV. [. . . ] Then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. Natural: Enhances clarity, detail and presence of sound by using "BBE High Definition Sound system"*. Dynamic: "BBE High Definition Sound system"* intensifies clarity and presence of sound for better intelligibility and musical realism. Resets the sound to the factory preset levels. Off: volume level changes according to the broadcast signal. On: volume level of the channels will stay the same, independent of the broadcast signal (e. If you are listening to the TV through headphones, the "Effect" option will automatically be switched to "Off". ** This TV has been designed to create the "Dolby Surround" sound effect by simulating the sound of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external amplifier (for details refer to "Connecting to external audio Equipment" on page 21). Level 3 / Function SLEEP TIMER The "Sleep Timer" option in the "Features" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press set the time period delay (max. Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. E) View and record correctly scrambled channels when using a decoder connected directly to Scart This option is only available depending on the country you have selected in the "Language/Country" menu. Finally press OK twice to confirm and store. To cancel this function afterwards, select "Off" instead of "On" in the step above. Level 3 / Function RGB CENTRING When connecting an RGB source, such as a "PlayStation", you may need to readjust the horizontal position of the picture. If this is the case, you can adjust it through the "RGB Centring" option in the "Detail Set Up". Then press or to adjust the centre of the picture between ­10 and +10. The index page of the teletext service (usually page 100) gives you information on how to use the service. Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal. ⷠAfter 5 minutes viewing the same teletext page and without any button being pressed, the brightness level of the picture automatically decreases notoriously to avoid any damage to the picture tube. [. . . ] For more information on SmartLink, please refer to the Instruction Manual of your VCR). Design and specifications are subject to change without notice. Here are some simple solutions to problems which may affect the picture and sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings (see page 12). [. . . ]