User manual SONY KP-48V80

[. . . ] This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Press to turn on the DVD/VCR player you have programmed into the remote control. For instructions, see "Programming the Remote Control" on page 68. Fast-forward Use to switch control for connected video equipment. You can program one video source for each switch position. For details, see "Programming the Remote Control" on page 68. Pause (Press again to resume normal playback) Displays the Video equipment menu. 9 POWER q; M qa qs X qd MENU qf M, m, <, , , Use to operate the DVD menu. and ENTER qg Press to select an audio option: Steady Sound ON or OFF. 36 Model name1[KP-48V80] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500] [4-088-847-12] 01COV. book Page 37 Tuesday, July 30, 2002 3:46 PM Using the Features Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some of the buttons found on your remote control. Buttons for Projection TV Operations 1 TV (FUNCTION) Using the Features Activates the remote control for use with the projection TV. 2 ANT-- (AUX input) Press to change between the VHF/UHF input and the AUX input. 3 TV (POWER) Turns the projection TV on and off. If a video input indication (e. g. , VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ ­ until a channel number appears. 4 0-9 and ENTER Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0). The channel will change after 2 seconds, or you can press ENTER for immediate selection. 5 CH +/­ Press to scan through the channels (+ up or ­ down). 6 VOL +/­ Press to adjust the volume (+ up or ­ down). 7 JUMP Press to alternate or jump back and forth between two channels. You can also change the size of both the left and right pictures. Activating Twin Pictures To display twin pictures 1 2 Using the Features Make sure your projection TV is tuned to a working channel. Press . To cancel twin pictures again (or press Press ). Activating the Picture Although two pictures appear on the screen at the same time, only one picture is active. For an active picture, you can: Change channels. Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input. When the picture on the right is activated, the input sources cannot be switched to VIDEO 5, 6, 7, or AUX by pressing ANT. Change the picture size by pressing the joystick up or down. To activate the right picture Move the joystick to the right. To activate the left picture Move the joystick to the left. (Continued) 41 Model name1[KP-48V80] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500] [4-088-847-12] 01COV. book Page 42 Tuesday, July 30, 2002 3:46 PM Using the Features Factors Affecting Twin View: - If you use a cable box to view all channels, the same channel appears in both windows because the cable box unscrambles only one channel at a time. - If you use a cable box, you can view the cable box output in one window and view a different source (such as a VCR or DVD player) in the second window by using the TV/VIDEO button. - Sources connected to the AUX, VIDEO 5, VIDEO 6, and VIDEO 7 inputs display in the left window, but not the right. - If you are viewing a 4:3 source and a 16:9 enhanced source (such as a DVD) side by side, the 4:3 source appears larger. - Twin View does not display channels that are blocked by Parental settings (page 60). The active picture is highlighted in cyan. 42 Model name1[KP-48V80] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500] [4-088-847-12] 01COV. book Page 43 Tuesday, July 30, 2002 3:46 PM Using the Features Changing the Picture Size The zoom feature lets you change the size of the left and right pictures. To enlarge the left picture (reduce the right) To enlarge the right picture (reduce the left) 1 v Move the joystick left to activate the left picture (if not already activated). Move the joystick up to enlarge the picture and move the joystick down to reduce the picture. 1 Move the joystick right to activate the right picture (if not already activated). [. . . ] Use Auto Program in the Channel menu to add receivable channels that are not presently in TV memory (see page 54). Make sure Cable is set to ON in the Channel menu (see page 53). Increase the volume of the cable box using the cable box's remote control. Then press TV (FUNCTION) and adjust the projection TV's volume. [. . . ]