User manual SONY KP-51HW40

[. . . ] 4-084-488-12(1) Projection TV Operating Instructions KP-51HW40 KP-57HW40 © 2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the projection TV to rain or moisture. Note on Caption Vision This television receiver provides display of television closed captioning in accordance with §15. 119 of the FCC rules. Note on convergence adjustment CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Before you use your projection TV, make sure to adjust convergence. For details, see "Adjusting the Convergence Automatically ­ FLASH FOCUSTM ­" on page 33. ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Use of this television receiver for other than private viewing of programs broadcast on UHF, VHF, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] To turn the display off, press DISPLAY again. qs TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6. If you select Skip as a Video Label in the Setup menu, your projection TV will skip the video input you selected (see "Video Label" on page 59). qd MTS/SAP Press to scroll through the Multi-channel TV Sound (MTS) options (see "MTS" on page 51). qf PIC MODE Press PIC MODE repeatedly to directly choose one of four different video modes that best suits the program you are watching. Vivid: Select for enhanced picture contrast and sharpness. Standard: Select to display a standard picture for normal viewing environments. Movie: Select to display a finely detailed picture for low light environments. Pro (Professional): Select to display a picture with minimum enhancements. When you select each mode, you can also adjust the picture quality (such as Brightness, Color, etc. ) to suit your taste. For details, see "Mode" on page 49. 38 Using the Features Watching the Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats. This projection TV is not capable of displaying a native 720p format signal. When a 720p format signal is received, it is converted into a 480p format signal. To view a digital TV program Using the Features 1 2 3 4 Connect the DTV receiver to VIDEO 5 or 6 IN on the projection TV. (for details, see page 28) Press TV/VIDEO to select VIDEO 5 or 6. Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. Adjust the volume of the projection TV as necessary. 39 Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. To display a list of your favorite channels: Your Favorite Channel options can be set automatically or manually. The factory setting for Favorite Channel is Auto. When Favorite Channel is set to Auto, the last eight channels selected with 0-9 buttons will be set as Favorite Channel options. If you want to input your own selections as Favorite Channel settings, see "Favorite Channel" on page 53. 1 Press FAVORITES. The Favorite Channel options appear. Preview window Favor ites 124 6 10 12 2 8 8 4 Exit 2 Move the joystick up or down to highlight the channel you want to watch. The program of that channel appears in the preview window. Press to select. 40 Using the Features Using Twin ViewTM Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Activating Twin Pictures To display twin pictures 1 2 Using the Features Make sure your projection TV is tuned to a working channel. Press . To cancel twin pictures Press again (or press ). Activating the Picture Although two pictures appear on the screen at the same time, only one picture is active. Change the picture size by using the joystick. For an active picture, you can: Change channels. Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input. [. . . ] Make sure Cable is set to ON in the Channel menu (see "Cable" on page 53). Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 54). Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 54). In the password screen (see page 60), enter the following master password: 4357. [. . . ]