User manual SONY KP-R46CX50

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antennas. [. . . ] For instructions, see "Programming the Remote Control" on page 65. Fast-forward Use to switch control for connected video equipment. You can program one video source for each switch position. For details, see "Programming the Remote Control" on page 65. Pause (Press again to resume normal playback) Displays the DVD title. 9 POWER q; M qa qs X qd DVD TITLE qf M, m, <, , , Use to operate the DVD menu. and ENTER qg Press to select an audio option: Steady Sound ON or OFF. 36 Using the Features Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some buttons found on your remote control. Buttons for Projection TV Operations 1 TV (FUNCTION) Using the Features Activates the remote control for use with the projection TV. 2 ANT-- (AUX input) Press to change between the VHF/UHF input and the AUX input. (for detailed connection information, see "Cable and Antenna" on page 16 or "Cable Box Connections" on page 17) 3 TV (POWER) Turns the projection TV on and off. If a video input indication (e. g. , VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ ­ until a channel number appears. 4 0-9 and ENTER Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0). The channel will change after 2 seconds, or you can press ENTER for immediate selection. 5 CH +/­ Press to scan through the channels (+ up or ­ down). 6 VOL +/­ Press to adjust the volume (+ up or ­ down). 7 JUMP Press to alternate or jump back and forth between two channels. When Favorite Channel is set to Auto, the last eight channels selected with 0-9 buttons will be set as Favorite Channel options. If you want to input your own selections as Favorite Channel settings, see "Favorite Channel" on page 52. 1 Press FAVORITES. The Favorite Channel options appear. Preview window 2 Move the joystick up or down to highlight the channel you want to watch. The program on that channel appears in the preview window. Press to select. 40 Using the Features Using Twin ViewTM Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Displaying Twin Pictures To display twin pictures 1 2 Using the Features Make sure your projection TV is tuned to a working channel. Press . , , To cancel twin pictures Press again (or press ). Activating the Picture Although two pictures appear on the screen at the same time, only one picture is active. Change the picture size by using the joystick. For an active picture, you can: Change channels. Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input. Change the picture size by pressing the joystick up or down. To activate the right picture Move the joystick to the right. , , To activate the left picture Move the joystick to the left. (Continued) 41 Using the Features When you adjust the twin screen sizes, the projection TV memorizes the change. [. . . ] Make sure Cable is set to ON in the Channel menu. (see "Cable" on page 52) Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory. (see page 53) Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory. (see page 53) In the password screen (see page 54), enter the following master password: 4357. [. . . ]