User manual SONY KV-13M42

[. . . ] Position the unit so that there is a clear space of 10 cm from a wall, allowing you to press the U (MAIN POWER) switch to turn it on and off completely. Television programmes, films, video tapes and other materials may be copyrighted. This video TV is designed to receive TV programmes based on PAL (I) colour system and to record and play on PAL colour system. Do not expose the unit to rain or moisture. [. . . ] select other characters in the same way. For the element you want to leave blank, select "-" and press OK. However, if the picture of a programme is distorted, you can use the manual finetuning function to obtain better picture reception. 4 Using + or ­ , move the cursor (z) to the programme position which 5 Press OK repeatedly until the AFT position turns red, then press + or ­ While holding down + or ­ , the tuning bar flashes red and green by turns, and the channel is fine-tuned. When the best TV reception is found, release + or ­ . To reactivate automatic finetuning (AFT) Repeat from the beginning and select "ON" in step 5. To use VIDEO plus+, each programme position needs to be matched with its VIDEO plus+ guide channel. To get the guide channel numbers, see "Guide channels for VIDEO plus+" on page 13, or look in the programme guide for your area that features PlusCodes. 5 Select the guide channel you want to preset with + or ­ , and press OK. 7 After you finish presetting, press MENU to go back to the original screen. You need to set the clock for using timer recording and quick-timer recording functions. Recording resumes from the point set in step 1. When the recording pause mode lasts for about 5 minutes, the video TV stops recording to protect the quality of video tapes. The TV screen is turned off and the u lamp lights up. Press OK, then set the minute of the recording start time to "15" with + or ­ . Press OK, then set the hour of the recording stop time to "21" with + or ­ . Press OK, then set the minute of the recording stop time to "55" with + or ­ . Press OK, then set the programme position to "26" with + or ­ . 10 When you want to set other programmes, press ­ to move down the If you have made a mistake during timer setting Press ?To go back to the previous position and correct the setting. If you try to enter the recording start time prior to the current time All the items of the setting will be erased. If you try to do incorrect operation The video TV displays a message on the screen to interrupt your setting. [. . . ] 2 Press the number buttons to enter the desired programme's PlusCode. To record the programme Only once Monday to Friday at the same scheduled time Every week at the same scheduled time Press ONCE DAILY WEEKLY If you have made a mistake entering programme`s PlusCode Press TIMER REC CLEAR and reenter the correct number. The TIMER REC lamp on the front of the video TV lights up and the video TV enters timer recording standby mode. You can automatically switches the video TV into standby mode after a selected time period. [. . . ]