User manual SONY KV-13TR27

[. . . ] If you use this optional connection it can improve the picture and sound quality when using a VCR. [. . . ] Also refer to your VCR instruction manual to find out how to find the output channel of your VCR. Select the language of the menu screens. Adjust the picture slant. Remote Control RM-938 2 Batteries (AA size) Tune your TV. Change the broadcast channels into a different order. Inserting Batteries into the Remote Control Switching on the TV View TV Programmes. · Make sure you insert the supplied batteries using the correct polarities. · Always remember to dispose of used batteries in an environmental friendly way. Connect the TV plug to the mains socket (220-240V AC, 50Hz). FD Trinitron Colour Television 4-093-903-01 (1) ©2003 by Sony Corporation Printed in Spain Ecological Paper - Totally Chlorine Free The first time the TV set is connected, it is usually turned on. If the TV is off, push in the On/Off switch on the front of the TV Selecting the language of the menu screens This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu screens. Language English Norge Français Italiano Nederlands Select Language: Confirm: OK The first time that you switch on your TV, the Language menu appears automatically. 5 Automatically Tuning the TV You need to tune the TV to receive channels. By following the instructions below, you can correct the picture slant if it is necessary. If picture slants, please adjust picture rotation Not necessary Adjust now Select: Confirm: OK a) If it is not necessary, press OK to select Not necessary. b) If it is necessary, press or to select Adjust now, then press OK and correct any slant of the picture between ­5 and +5 by pressing or . Finally press OK to store. 6 Programme Sorting Programme: 01 TVE2 41 02 TVE 03 ANT3 04 TELE5 05 C+ 06 C44 Select new position TVE No channel found Please connect aerial Confirm If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see step 3) and press OK. [. . . ] Please connect the aerial (see step 3) and press OK. [. . . ]