User manual SONY KV-1405

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] The indicator on the TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Set TV to turn off automatically according to the desired period of time (max. (red, green, yellow, blue) X Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the "Personal" option. The last adjusted picture setting from the "Picture Adjustment" option in the menu (see page 18). Press (or SOUND MODE on the front panel) to select the desired sound mode. To listen to dynamic and clear sound that emphasizes both the low and high tones. Sound that emphasizes voice and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 20). You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. If the stereo sound is noisy when receiving a stereo program, select "Mono". Press V or v to select "On", then press To cancel, select "Off", then press . * You can adjust the setting to your personal preference in the "Picture Adjustment" and "Color Temperature" options only when the "Personal" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . Selecting "Reset" will set your TV to the factory setting. Press V, v, B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items. The adjusted settings will be received when you select "Personal". Reducing "Sharpness" can also reduce picture noise. The "Sound" menu allows you to adjust the sound settings. * You can adjust the setting to your personal preference in the "Sound Adjustment" option only when the "Personal" mode is selected (see page 20). The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Personal" mode in the menu. Make sure that "Adjust" is selected, then press . [. . . ] If you want to skip this program number when using PROG +/­ , you can select the "Skip" feature. (1) Press V or v to select "Skip", then press (2) Press V or v to select "On", then press To cancel, select "Off", then press . If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the "Signal Booster" feature. (1) Press V or v to select "Signal Booster" , then press . [. . . ]