User manual SONY KV-14CT1E

[. . . ] Do not operate the TV if any liquid or solid object falls into it. Do not install the TV in a confined space, such as a bookcase or built-in cabinet. Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. [. . . ] Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in "PERSONAL" option. Press PIC MODE repeatedly until you get the desired picture mode. Receive the last adjusted picture setting from the "ADJUST" option in the "PICTURE" menu (see page 21). Press SOUND MODE repeatedly until you get the desired sound mode. To listen to dynamic and clear sound that emphasizes the low and high tones. Listen to sound that emphasizes voice and high tones. Receive the last adjusted sound setting from the "ADJUST" option in the "SOUND" menu (see page 23). You can also set the picture and sound modes using the menu (see Changing the "PICTURE" setting on page 21 and Changing the "SOUND" setting on page 23). You can display and select six of your favorite channels directly from your TV screen. Press the number button from 1 to 6 to select the desired favorite channel. To program your favorite channels, see Adjusting each program number settings (PROGRAM SETUP) on page 26. * If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half n Enlarge lower half n Normal size. 1 Enter the Teletext page number that you want to refer to, then press . Wait for a Teletext page while watching a TV program * You can also select a Teletext page that appears in the colored columns at the bottom of the screen using the corresponding color-coded buttons on the remote. This feature allows you to quickly access a Teletext page that uses FASTEXT. When a FASTEXT program is broadcasted, the colored menus appear at the bottom of the screen. The colors of the menus correspond to the red, green, yellow, and blue color-coded buttons on the remote. The MENU button lets you open a menu and change the settings of your TV. here's an overview of the menu system. Return icon "PICTURE" icon "SOUND" icon "SETUP" icon "CH PRESET" icon Menu level 1 Name of the current menu Guide mark icon Menu level 3 Menu level 2 Level 3/Function Select the picture mode: "DYNAMIC"t "STANDARD"t "SOFT"t "PERSONAL"t "ADJUST" Adjust the "PERSONAL" option: "PICTURE" t "COLOR"t "BRIGHT"t "HUE"t "SHARP" Change the picture size. How to use the menu You can use the buttons on the remote and on the TV as well to display the menu and adjust the settings. [. . . ] To continue adjusting other program number, press + or ­ to select "PR", then repeat step 2 and 3. The "CH PRESET" menu allows you to adjust the setup of your TV. For example, you can receive a channel with a weak signal that fails to be tuned in by automatic presetting. Press + or ­ to select either "B/G", "I", "D/K" or "M", then press ENTER. [. . . ]