User manual SONY KV-14FV1B

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] You can select your desired TV program directly from the PIP sub screen by using PIP PROG +/­ buttons. You can only enjoy stereo sound from the main screen. ⷠYou cannot change the picture to a video input in the sub screen. You can only display a video input, in the sub screen by swapping the pictures when a video input is displayed in the main screen. ⷠThe picture and sound from the T (monitor output) terminals will always be from the main screen, even when you select the sub screen sound by pressing (see page 31). You can sing along with any music program of TV broadcast or with any audio/ video equipment or create visual presentations (e. Photos or video stories) with narration and favorite background music by using the Party Mode feature. You can begin singing or speaking from the microphone at the last TV volume setting. If you want to change the audio source, select the input connected to the audio equipment which you want to hear from "Audio Input Fix" (see page 28). To revert to the original sound source, press PARTY MODE again to display the "Party Mode Setup" menu and select "Off" from "Audio Input Fix" (see page 28). Be sure to adjust the "MIC Level" and "Echo Level" to the minimum level before plugging in and disconnecting the microphone. the following is an overview of the menu system. Picture icon Sound icon PIP icon Channel Setup icon Setup icon Menu level 1 Menu level 3 Menu level 2 Level 3/Function Select the picture mode: "Dynamic" t "Standard" t "Soft" t "Personal" "Picture Adjustment" Adjust the "Personal" option: "Picture" t "Brightness" t "Color" t "Hue" t "Sharpness" t "Reset" "Color Temperature" Adjust white color tint: "Cool" t "Neutral" t "Warm" "3D Intelligent Picture" "Sound" "Mode" Optimize picture quality: "On" t "Off" Select the sound mode: "Dynamic" t "Drama" t "Soft" t "Personal" 23 "Sound Adjustment" Adjust sound frequency settings of "Personal" option: "Adjust" t "Reset" "Balance" Select to emphasize the left and right speakers. Level 3/Function Display a sub screen within the main picture: "On" t "Off" Exchange pictures between main screen and sub screen. Change the order in which the channels appear on the screen. Press (or b) to confirm your selection and go to the next level. If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is highlighted, then press . ⷠThe MENU, t and 2 +/­ buttons on the TV front panel can also be used for the operations above (see page 9). note · When a feature is dimmed in the menu, it is not selectable. The "Picture" menu allows you to adjust the picture settings. Make sure the "Picture" icon ( selected, then press . Automatically, the picture will become clearer and sharper if the signal is good and noise will be reduced if the signal is noisy. [. . . ] ⷠTo prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal. If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 27). ⷠWhen both (S video) and (video) for t1 or t4 are connected at the same time, (S video) is automatically selected. If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. [. . . ]