User manual SONY KV-14LM1U

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] For a better reception we recommend you connect an external aerial. However, where an external aerial is not available and your local UHF signal is strong you can connect the supplied loop aerial as follows: 1 Insert the loop aerial into the opening on top of the set until it clicks. For more details of VCR connection, please refer to the section "Connecting Optional Equipment" of this instruction manual. The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e. When you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the "Menu Guide" section of this instruction manual. 50Hz) The first time the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you press this button, a Language menu displays automatically on the TV screen. Or button on the remote control to select the language, then press the OK button to confirm your selection. 4 A new menu appears on the screen asking you to check The TV starts to automatically search and store all available channels (TV Broadcast) for you. Please be patient and do not press any button, otherwise the automatic tuning will not be completed. After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. If you do not wish to change the channel order, go to step 6. If you wish to change the channel order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. [. . . ] When the programme you want to skip appears on the screen, select the Skip option and press . Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. PARENTAL LOCK The "Parental Lock" option in the "Advanced Features" menu allows you to lock the buttons of the TV set. [. . . ]