User manual SONY KV-14LT1K

[. . . ] Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. [. . . ] ⷠIf the country in which you want to use the TV set does not appear in the list, select "-" instead of a country. ⷠIn order to avoid wrong teletext characters for Cyrillic languages we recommend to select Russia country in the case that your own country does not appear in the list. 5 A new menu appears on the screen asking you to check The TV starts to automatically search and store all available channels (TV Broadcast) for you. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed. After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. If you do not wish to change the channel order, go to step 7. If you wish to change the channel order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. To do that: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Personal (for individual settings). Select Reset and press OK to reset the picture to the factory preset levels. SLEEP TIMER The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do that: after selecting the option press , then press or to set the time period delay (max. While watching the TV, you can press the button on the remote control to display the time remaining. ⷠOne minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically. ON TIMER The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do that: after selecting the option press , then press or to set the time period delay (max. Any loss of power will cause these settings to be cleared. [. . . ] To cancel this function afterwards, select "Off" instead of "On" in the step above. RGB CENTRING When connecting an RGB source, such as a "PlayStation", you may need to readjust the geometry of the picture. In that case, you can readjust it through the "RGB Centring" option in the "Advanced Features". Then press or to adjust the centre of the picture between ­10 and +10. [. . . ]