User manual SONY KV-20FV300

[. . . ] 01US01COV-BR2. book Page 1 Friday, December 14, 2001 7:07 PM Connecting Additional Equipment 4-086-343-21 Operating Instructions KV-20FV300 KV-24FV300 © 2002 by Sony Corporation 01US01COV-BR2. book Page 2 Friday, December 14, 2001 7:07 PM 01US01COV-BR2. book Page 3 Friday, December 14, 2001 7:07 PM Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Press for a direct selection of Effect settings (Simulated, WOW, SRS, Off) (see page 20). Press to return to factory settings while in an on-screen menu. Press when you want to adjust the volume. Use to program your remote control to operate connected video equipment (see page 32). Press when you want to turn connected equipment on or off. Press when you want to control connected equipment with your remote control. Use when you want to operate connected VCR or DVD with your remote control. Press once to show current time (if set) and channel number. Cycles through the Multi-channel TV Sound (MTS) options: Stereo, Mono, and Auto SAP (Second Audio Program). Press 0 9 buttons to select a channel, then press ENTER. Brings up the custom guide of your satellite receiver. Moves the cursor in the on-screen menus. Press the arrow buttons to move the cursor. Press the center button to select or access an option. 7 8 RESET 9 VOL (volume) 0 CODE SET qa POWER qs FUNCTION qd VCR/DVD (operating) qf TV/VIDEO qg DISPLAY qh MTS/SAP qj 0 9 and ENTER qk GUIDE ql w; MENU wa CH (channel) Displays the on-screen menu. Press again to exit the menu at any time. Press when you want to change channels. If you lose your remote control, see page 36. 13 01US01COV-BR2. book Page 14 Friday, December 14, 2001 7:07 PM Operating Instructions Setting Up the TV Automatically After you have finished connecting your TV, you can perform Auto Program to set up your channels. 1 Press TV to turn on the TV. The Initial Setup screen appears. Initial Setup First please connect cable / antenna Auto Program Exit [CH+] [CH­] 2 Press press on the remote control or on the TV front panel to perform Auto Program, or to exit. The Initial Setup screen appears each time you turn on the TV until you perform Auto Program. To perform Auto Program again 1 2 3 4 5 Press . to exit. Press g to highlight Channel Setup ( Press f to highlight Cable. Press Press F or f to select On or Off according to how you connected your TV. Press Press f to highlight Auto Program. Press After performing Auto Program, press 14 01US01COV-BR2. book Page 15 Friday, December 14, 2001 7:07 PM Using the Remote Control and Basic Functions Quick Start to the Menus The following settings are available in your on-screen menus: Menu Allows you to Video : Vivid Picture Brightness Color Hue Sharpness Color Temp. : Cool VM : High End Return Select End Video Mode : Vivid Picture Controls Move Select Make adjustments to your picture settings. Options Audio Treble Bass Balance Steady Sound : Off Effect : Off Options Move Select MTS : Stereo Speaker : On Audio Out : Fixed End Return Select End Change your audio settings. Channel Setup Favorite Channels Cable : On Channel Fix : Off Auto Program Channel Skip/Add Channel Label Move Select End Customize your channel settings. 15 01US01COV-BR2. book Page 16 Friday, December 14, 2001 7:07 PM Operating Instructions Menu Allows you to Parental Control Password : Move Select End Set rating limits on your TV based on a program's rating or content. Timer Timer 1 : Set Timer 2 : Set Current Time Move Select End Set the clock on your TV and program scheduled viewing using Timer 1 and Timer 2. Setup Caption Vision : Off Video Label Tilt Correction Language : English Demo Move Select End Select captioning options, label video inputs, adjust tilt correction, select menu languages, or run a demo of the menus. 16 01US01COV-BR2. book Page 17 Friday, December 14, 2001 7:07 PM Operating Instructions Using the Menus This section shows the options available for setting up and adjusting your TV. To Access a Menu 1 2 3 4 5 Press to display the on-screen menu. [. . . ] Adjust Brightness in the Picture Controls menu under Video (page 19). Check the antenna and/or cable connections (page 4). Press so that MUTING disappears from the screen (page 13). Your TV may be set to Auto-SAP or your Speakers might be Off (page 21). [. . . ]