User manual SONY KV-21CE10K

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] The Picture Rotation menu allows you to correct the picture slant if it is necessary. B) If it is necessary, press 2+/- button to correct any slant of the picture. To allow this menu to appear again, press and hold MENU button at top control panel for about 5 seconds. The MENU, and V, b, v, B buttons on the remote control can also be used for the operations above. Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: The "Picture" menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter, press b, then press v/V/B or b repeatedly to adjust and finally press to store the new adjustments. This menu also allows you to customise the picture mode based on the programme you are watching: Game (for a picture from a game). Select to reset the picture to the factory preset levels. If any changes are made to "Picture Adjustment", "Mode" will switch automatically to "Personal" and the new settings will be stored as "Personal". The "Sound" menu allows you to alter the sound adjustments. To do this: After selecting the item you want to alter, press b, then press v/V/B or b repeatedly to adjust and finally press to store it. Dynamic (dynamic and clear sound that emphasizes both the low and high tones). Personal (flat and smooth sound that can be customized by users). Select to reset the sound to the factory preset. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press b, then press V or v to set the time period delay (max. Of 1 hour 30 minutes) and finally press to store. While watching the TV, you can press the button on the remote control to display the time remaining. One minute before the TV switches itself into standby mode "TV will turn off soon" is displayed on the TV screen automatically. The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. [. . . ] The index page of the teletext service (usually page 100) gives you information on how to use the service. to operate teletext , use the remote control buttons as indicated below. Be sure to use a channel (TV Broadcast) with a strong signal, otherwise Teletext errors may occur. After selecting the TV channel which carries the teletext service you wish to view, press . [. . . ]