User manual SONY KV-21CL1K

[. . . ] Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. A) If you wish to keep the broadcast channels in the tuned order, B) If you wish to store the channels in a different order: 1 Press 2 +/­ to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press t. 2 Press 2 +/­ to select the new programme number position for your selected channel (TV Broadcast), then press t. 3 Repeat steps b) 1 and b) 2 if you wish to change the order of the other channels. Picture Rotation menu allows you to correct the picture slants if it is necessary. B) If it is necessary, press 2 +/­ to correct any slant of the picture To allow this menu to appear again, press and hold MENU button at top control panel for about 5 seconds. The MENU, and / / / buttons on the remote control can also be used for the operations above. Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: The "Picture" menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter, press , then press / / or repeatedly to adjust it and finally press to store the new adjustment. This menu also allows you to customize the picture mode based on the programme you are watching: Game (for a picture from game). To reset the picture to the factory preset levels. Once any changes are made to "Picture Adjustment", "Mode" will switch automatically to "Personal" and the new setting will be stored as "Personal". The "Sound" menu allows you to alter the sound adjustments. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. Of 1 hour 30 minutes) and finally press to store. While watching the TV, you can press the button on the remote control to display the time remaining. One minute before the TV switches itself into standby mode, "TV will turn off soon" is displayed on the TV screen automatically. [. . . ] To do this: After selecting the option, press and then proceed in the same way as in the step 2 and 3 of the section "Switching On the TV and Automatically Tuning" (see page 8). Picture Rotation Because of the earth's magnetism, the picture might slant. In this case, you can correct the picture slant by using the option "Picture Rotation" in the "Set Up" menu. to do this: After selecting the option , press . [. . . ]