User manual SONY KV-21CT1B

[. . . ] informs you of the result of the instructions. The process continues on the next page to get final result. To prevent fire or electric shock, please follow the safety procedures indicated below. Do not expose the TV set to rain or moisture. [. . . ] After having selected the language, a new menu appears automatically on the TV screen asking you to automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e. When you move house), select the menu AUTO PROGRAMME in the (SET UP) menu and proceed in the same way as described below in step 1 or, please refer to the section "Automatically Tuning the TV using the TV buttons" of this instruction manual. A new menu appears automatically on the screen asking you to check that the antenna is connected. When the automatic tuning is finished, the Programme Sorting menu appears on the TV screen. If you stop the automatic tuning by pressing the MENU button, the Programme Sorting menu does not appear automatically on the TV screen. After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to change the order in which the channels appear on the screen. However, if you wish to rearrange the order of the channels afterwards, select the menu PROGRAMME SORTING in the (SET UP) menu and proceed in the same way as described in the b) section of this chapter. A) If you do not wish to change the channel order: Your TV is now ready for use. Press the PROGR or button until the channel (TV Broadcast) you wish to rearrange appears on the screen. Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press the OK button. Repeat steps 4 to 7 to skip other unused programme positions. When changing channels (TV Broadcasts) with the PROGR +/- buttons, the skipped programme positions do not appear. You can, however, still select them using the number buttons. Although the picture is adjusted at the factory, you can modify it to suit your own taste. With the cursor highlighting the item you wish to change, press the button. (Refer to the table below for the effect of each control). PICTURE CONTROL MODE OPERATION / EFFECT PERSONAL (for individual settings) LIVE (for live broadcast programmes) MOVIE (for films) Less More Darker Brighter Less More Softer Sharper Greenish Reddish Resets picture to the factory preset levels. Press the / or / button to alter the selected item, then press the OK button to store the new adjustment. Repeat steps 3 to 5 to alter the other items. Press the button to select your desired picture mode (PERSONAL, LIVE or MOVIE). Although the sound is adjusted at the factory, you can modify it to suit your own taste. [. . . ] Make sure to use a TV channel with a strong signal, otherwise teletext errors may occur. Select the TV channel which carries the teletext service you wish to view. Input three digits for the page number, using the numbered buttons on the remote control. (if you have made a mistake, type in any three digits and then, re-enter the correct page number). [. . . ]