User manual SONY KV-21FQ10E

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] 4 A new menu appears on the screen asking you to check The TV starts to automatically search and store all available channels (TV Broadcast) for you. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed. After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. If you do not wish to change the channel order, go to step 6. If you wish to change the channel order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. To do that: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. C) Skip any unwanted programme numbers When they are selected with the PROGR +/buttons. When the programme you want to skip appears on the screen, select the Skip option and press . Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. D) Label a channel using up to five characters. To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next to select a letter, number or press or "-" for a blank. After selecting all the characters, press OK twice to store. [. . . ] To Select a Teletext page: Input 3 digits for the page number, using the numbered buttons. â· If you have made a mistake, retype the correct page number. â· If the counter on the screen continues searching, it is because this page is not available. In that case, input another page number To access the next or preceding page: Press PROGR + ( ) or PROGR - ( ). [. . . ]