User manual SONY KV-21FT1B

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] For more information, refer to the "Menu Guide" section of this instruction manual. The first time you press this button, a Language menu displays automatically on the TV screen. Or button on the remote control to select the language, then press the OK button to confirm your selection. Press the or button to select the country in which you will operate the TV set, then press the OK button to confirm your selection. â· If the country in which you want to use the TV set does not appear in the list, select "-" instead of a country. â· In order to avoid wrong teletext characters for Cyrillic languages we recommend to select Russia country in the case that your own country does not appear in the list. 5 A new menu appears on the screen asking you to check The TV starts to automatically search and store all available channels (TV Broadcast) for you. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed. After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. If you do not wish to change the channel order, go to step 7. By one to the programme order of your choice. Press or to select on which programme number you want to preset the channel (for VCR, select programme number "0"). After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. Operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. C) Skip any unwanted programme numbers When they are selected with the PROGR +/buttons. When the programme you want to skip appears on the screen, select the Skip option and press . [. . . ] To Switch On Teletext : After select the channel (TV Broadcast) which carries the teletext you wish to view, press . To Select a Teletext page: Input 3 digits for the page number, using the numbered buttons. â· If you have made a mistake, retype the correct page number. â· If the counter on the screen continues searching, it is because this page is not available. [. . . ]