User manual SONY KV-21FV1B

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] Speed Press V to select `Speed' then press the OK button repeatedly to select between `SP' for standard play or `LP' for longplay. With longplay you can record twice as much on a videotape. VCR Setup Press V to select `VCR Setup' then press the OK button repeatedly to select which VCR you wish to programme, namely `VCR1' or `VCR2'. Finally, press B to select the icon then press the OK button to remove the menu from the TV screen. The index page of the teletext service (usually page 100) gives you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors. Select the TV channel which carries the teletext service you want to view. The screen is divided in two, with the TV channel in the right corner and the Teletext display on the left. in P&T mode press then press PROGR+/- to change the channel of the TV screen. Press b or B to change the size of the TV screen then press again to resume normal teletext reception. Input three digits for the page number using the numbered buttons on the remote control. Repeat steps 3-5 if you wish to adjust any of the other items. US video tapes) Reset AI (Artificial Intelligence) Resets picture to the factory preset levels V v Off: On: Normal Automatic optimization of contrast level according to the TV signal. Normal: Basic 100Hz picture quality DRC 50: Improved picture resolution for viewing scrolling characters DRC 100: Optimum picture resolution creating flicker-free pictures Warm: Normal: Cool: Gives a warm tint to the picture. Finally, press the OK button to store the new adjustment. If you want to store the new setting, you need to set the Equaliser mode to `Personal'. Personal mode permanently stores the setting, all other modes (Vocal, Jazz, Rock, Pop) store only until the next mode change. Balance b B V v V v V More left More right Off: On: Off: On: Normal For music broadcasts Normal Special acoustic effect On: Volume level of the channels will stay the same independent of the broadcast signal (eg in the case of advertisements) Off: Volume level changes according to the broadcast signal. When NICAM stereo is being broadcast, the indication NICAM appears briefly on the screen. Less b B More Only available when PAP feature is selected: V Stereo: The sound of one screen comes through both the TV loadspeakers and the headphones. V PAP: The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones. For more detail on PAP, refer to the `Operating PAP' section of this manual. [. . . ] Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR1 Beta VCR VTR2 8mm VCR VTR3 VHS VCR VTR4 Digital Video (DCR-VX 1000/9000E, VHR-1000) DVD Digital Video Disk 3. use the buttons on the remote control to operate the equipment. * * If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control. [. . . ]