User manual SONY KV-21FX20B

[. . . ] Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. However, some TVs may have features which require they are left in standby. [. . . ] from now on all the menus will appear in the selected language. Language Svenska Norsk English Nederlands Français Select language Select [­2+] Confirm [t] End [MENU] Language Svenska Norsk English Nederlands Français Select language Select [­2+] Confirm [t] End [MENU] Press 2+/button to select the country in which you will operate the TV set, then press t to confirm your selection. If the country in which you want to use the TV set does not appear in the list, select "-" instead of a country. In order to avoid wrong teletext characters for Cyrillic languages we recommend you select Russia as the country if your own country does not appear in the list. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you connect the aerial. After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. A) If you wish to keep the broadcast channels in their tuned order, press B) If you wish to store the channels in a different order: 1 Press 2+/- to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press t. 2 Press 2+/- to select the new programme number position for your selected channel (TV Broadcast), then press t. 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Because of the earth's magnetism, the picture might slant. To do this: After selecting the option, press b, then press V or v to set the time period delay (max. Any loss of power will cause these settings to be cleared. If no buttons are pressed for more than one hour after the TV is turned using the "On Timer", the TV automatically goes into standby mode. The "Channel Set Up" menu allows you to preset channels on this TV. The "Auto Tuning" option in the "Channel Set Up" menu allows you to automatically search and store all available TV channels. To do this: After selecting the option, press b, and then proceed in the same way as in step 4 of the section "Switching On the TV and Automatically Tuning" (see page 7). The "Programme Sorting" option in the "Channel Set Up" menu allows you to change the order in which the channels (TV broadcast) appear on the screen. To do this: After selecting the option, press b, and then proceed in the same way as in step 5b) of the section "Switching On the TV and Automatically Tuning" (see page 8). The "Programme Labels" option in the "Channel Set Up" menu allows you to name a channel using up to five characters (letters or numbers). to do this: 1 2 After selecting the option , press b. Press V or v to select the programme number with the channel you wish to name, then press . [. . . ] In this case, you can correct the picture slant by using the option "Picture Rotation" in the "Set Up" menu. When connecting an RGB source, such as a "PlayStation 2", you may need to readjust the horizontal position of the picture. In that case, you can readjust it through the "RGB Centring" option in the "Set Up" menu. The index page of the teletext service (usually page 100) gives you information on how to use the service. [. . . ]