User manual SONY KV-21LS30K

[. . . ] Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] This menu also contains two submenus as following: Mode Personal (for individual settings) Rock Pop Jazz Sound Effect: Auto volume: Off: Normal. Volume level of the channels will stay the same, independent of the broadcast signal (e. Select Reset and press OK to reset the sound to the factory preset levels. â· In case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel 2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono. SLEEP TIMER The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max. While watching the TV, you can press the button on the remote control to display the time remaining. â· One minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically. ON TIMER The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do this: after selecting the option press , then press or to set the time period delay (max. Any loss of power will cause these settings to be cleared. If you have not activated the "On Timer" option but the indicator on the TV set flashes, please contact to your nearest Sony Service Centre. LANGUAGE / COUNTRY The "Language/Country" option in the "Set Up" menu allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set. To do this: after selecting the option, press and then proceed in the same way as in the steps 2 and 3 of the section "Switching On the TV and Automatically Tuning". AUTO TUNING The "Auto Tuning" option in the "Set Up" menu allows you to automatically search for and store all available TV channels. To do this: after selecting the option, press and then proceed in the same way as in TV steps 5 and 6 of the section "Switching On the TV and Automatically Tuning". PROGRAMME SORTING The "Programme Sorting" option in the "Set Up" menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: after selecting the option, press and then proceed in the same way as in step 7 b) of the section "Switching On the TV and Automatically Tuning". PROGRAMME LABELS The "Programme Labels" option in the "Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name. [. . . ] Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the "Sound Adjustment" menu. To watch the picture of the connected equipment, press the correct input symbol appears on the screen. This symbol appears only if a RGB source has been connected. [. . . ]