User manual SONY KV-21V6E

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. a/B Selecting TV mode Press to switch off teletext or video input. 3 1 2 Back to the channel last watched 6 4 5 Press to watch the last channel selected (watched for 9 7 8 at least 5 seconds). Press again to remove the menu display MENU from the TV screen. Selecting picture mode Press repeatedly to change the picture mode. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to "Teletext" section of this instruction manual (see page 16). Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. VCR For more details of VCR connection, please refer to the section "Connecting Optional Equipment" of this instruction manual (see page 17). The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear on the screen and 4) adjust the picture slant. To reset the sound to the factory preset. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. Of 1 hour and 30 minutes) and finally press to store. While watching the TV, you can press the button on the remote control to display the time remaining. One minute before the TV switches itself into standby mode, "TV will turn off soon" is displayed on the TV screen automatically. The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. Any loss of power will cause these settings to be cleared. If no buttons are pressed for more than one hour after the TV is turned on using the "On Timer", the TV automatically goes into standby mode. [. . . ] to do this: Highlighting the Programme option , press PROG +/­ to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the or to select Yes. Next press Finally press twice to confirm and store. To cancel this function afterwards, select No instead of Yes in the step above. [. . . ]