User manual SONY KV-21V6U

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the set. Leave a clear space of 5 cm around the unit for adequate ventilation. Do not install the unit in hot, humid, or excessively dusty places. [. . . ] The page is displayed after a few seconds. First press ; to return to the TV mode, then repeat steps 1 through 3. If the signal of a TV channel is weak, Teletext errors may occur. Each time you press V, the screen changes as follows: n Teletext n Teletext and TV Preventing a Teletext page from being updated or changed A Teletext page may consist of several subpages. You can stop the page scrolling in order to read the text at your own pace. Press again to return to normal Teletext operation. This section shows you how to insert a video cassette and to play it. More convenient functions you can use while playing a tape are described in "Additional Operations" on page 36. The video TV turns on automatically when it is in standby mode. If you insert a cassette with its safety tab removed, playback starts. You can eject the cassette even if the power is in standby. Protecting your cassette against accidental erasure The cassette is provided with a safety tab to protect against accidentally erasing a previous recording. Break off the safety tab with a screw driver or a similar tool to prevent recording. If the safety tab is removed, the cassette is ejected when you try to record on it. To record on a cassette with the safety tab broken off, simply cover the tab hole with adhesive tape. 2 Using the + or ­ buttons, move the cursor (z) to "VCR MODE, " then 3 Using the + or ­ buttons, move the cursor (z) to "FORMAT, " then Note When you change channels, switch between input sources, or turn the power on and off, the video TV will switch back to normal mode. Maximum recording time SP mode: 4 hours with E-240 LP mode: 8 hours with E-240 You can also use The REC lamp on the front of the video TV lights up and recording begins. When the tape reaches the end, the video TV rewinds the tape automatically to the beginning, then stops. This function does not work when the power of the video TV is off. You can cut out an unwanted scene during recording with this button. 1 Press PAUSE P when an unwanted scene appears on the screen. 2 Press PAUSE P again to release the pause mode at the desired scene. [. . . ] If the cleaning tape is not available in your area, have the heads cleaned at your nearest Sony service facility. (Do not use a commercially available wet-type cleaning tape, as it may damage the video heads. Problems The cassette is ejected when you press REC r. / Cover the tab hole with adhesive tape, or use another cassette with a safety tab. [. . . ]