User manual SONY KV-27FS17

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Set TV to turn off automatically according to the desired period of time (max. (red, green, yellow, blue) PIP operations , , V, v, B, b Not function for your TV. X Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the "Custom" option. The last adjusted picture setting from the "Picture Adjustment" option in the menu (see page 17). To listen to dynamic and clear sound that emphasizes both the low and high tones. Sound that emphasizes voice and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 18). You are able to listen to the FM radio stations using your TV. To exit from FM Radio mode: Press WEGA GATE button, select the desired items: "TV" or "External Inputs", then press . You are able to change the settings of your TV from "Settings" in WEGA GATE menu. The following is an overview of the items that can be adjusted. When a feature is dimmed in the menu, it is not selectable. The "Picture" menu allows you to adjust the picture settings. Make sure the "Picture" icon ( selected, then press . Press V or v to select "On", then press To cancel, select "Off", then press . * You can adjust the setting to your personal preference in the "Picture Adjustment" and "Color Temperature" options only when the "Custom" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . Selecting "Reset" will set your TV to the factory settings. Press V, v, B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items. The adjusted settings will be received when you select "Custom". [. . . ] (3) Press V, v, B or b until the picture and sound quality are optimal, then press The + or ­ icon on the menu flashes while tuning. If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the "Signal Booster" feature. (1) Press V or v to select "Signal Booster" , then press . (2) Press V or v to select either "Off"(for picture distorted; picture with lines; signal interference) or "Auto" (for snowy picture), then press . [. . . ]