User manual SONY KV-27FV17

[. . . ] Connecting Additional Equipment 4-081-737-22 Trinitron Color TV ® Operating Instructions KV-27FS13 KV-27FS17 KV-27FV17 KV-32FS13 KV-32FS17 © 2001 by Sony Corporation User Guide Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to the CATV Installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. SAFETY PRECAUTIONS Operate the TV only on 120 V AC. One blade of the power plug is wider than the other for safety purposes and will fit into the power outlet only one way. [. . . ] Press Press F or to select ON or OFF according to how you connected your TV. Press After performing Auto Program, press to exit. F to search for channels. 17 Operating Instructions Using Picture in Picture (PIP) The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size "main" picture and one in a small "window" picture. Indicates which channel is currently receiving sound Main picture Channel number of the main picture Channel number of the window picture Window picture Dual Tuner PIP KV-27FS17, KV-27FV17, KV-32FS17 only These models are equipped with dual tuners. This means that PIP is "ready to use. " Press to turn the PIP feature on and off. Press repeatedly to change the size of the window picture and to turn off the PIP feature. Press repeatedly to cycle through available video inputs on the video equipment you have connected to the TV. Press to alternate sound between the main picture and the window picture. The sound symbol appears for 3 seconds, indicating whether you are hearing the sound from the main or picture window. Press to change the channel in the window picture. To change the channel in the main window, use the main CH+/- buttons at the bottom of the remote control. Press to move the location of the window picture among the four corners of the screen. Press to switch the main picture with the window picture. Press again to switch them back. 18 The AUX input cannot be viewed in the window picture. For more information about your remote control, see page 15. Using the Remote Control and Basic Functions To use PIP 1 2 3 Press the TV FUNCTION button on your remote to view a working channel. Press the button and the window picture appears. Use the yellow labeled buttons on your remote control to control the PIP features. See page 18 for descriptions on the PIP control buttons. To check your PIP 1 2 3 4 5 Press the TV FUNCTION button on your remote to view a working channel. Press the button and select that same channel again. You should now have the same program playing in both your main window and your picture window. Use the yellow CH+/- to change the channel in the picture window. Now use the main CH+/- on the bottom of your remote control to change the channel in the main window. Press the button to switch to other video inputs for other equipment that is connected to any of the VIDEO IN jacks at the back of your TV. You should see a different picture in your PIP window for each connected video equipment component. [. . . ] If you have connected a VCR, DVD or Satellite Receiver to the AUX input on the TV, it will not show in the small window picture. F Cannot access other menus when using the Basic Menu Lost password for Parental Control The TV needs to be cleaned Cannot change channels with the remote control Remote control does not operate Cable stations don't seem to work Make sure Cable is set to ON in the Channel Setup menu (page 26). Perform Auto Program to add channels that are not presently in the memory (page 17). Move the TV 3-4 feet away from fluorescent lights. Make sure you have not inadvertently switched your TV from the channel 3 or 4 setting if you are using another device to change channels. [. . . ]