User manual SONY KV-27XBR25

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] To temporarily switch off TV Press to temporarily switch off TV (the standby indicator 1 on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. a/B Selecting TV mode Press to switch off teletext or video input. 3 1 2 Back to the channel last watched 6 4 5 Press to watch the last channel selected (watched for 9 7 8 at least 5 seconds). Press again to remove the menu display MENU from the TV screen. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to "Teletext" section of this instruction manual (see page 16). Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. To reset the picture to the factory preset levels. If any changes are made to "Picture Adjustment", "Mode" will switch automatically to "Personal" and the new setting will be stored as "Personal". The "Sound" menu allows you to alter the sound adjustments. Auto Volume On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. Of 1 hour and 30 minutes) and finally press to store. While watching the TV, you can press the button on the remote control to display the time remaining. One minute before the TV switches itself into standby mode, "TV will turn off soon" is displayed on the TV screen automatically. The "On Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically on from standby mode. To do this: After selecting the option, press , then press or to set the time period delay (max. [. . . ] Next press adjust the fine tuning between -15 and +15. C) Skip any unwanted programme numbers when they are selected with the PROG +/­ button. to do this: Highlighting the Programme option , press PROG +/­ to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the or to select Yes. [. . . ]