User manual SONY KV-28CL11B

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] To listen to dynamic and clear sound that emphasizes both the low and high tones. Sound that emphasizes voice and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 18). Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To display a Teletext page on the TV picture Do this Press . Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. If there is no Teletext broadcast, "100" is displayed at the top left corner of the screen. Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Personal" mode in the menu. Make sure that "Adjust" is selected, then press . Selecting "Reset" will set your TV to the factory setting. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Personal". Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. ⷠYou may display the settings directly using the SOUND MODE button on the TV front panel (see page 8) or button on the remote control (see page 10). The "Timer" menu allows you to set TV to turn off and turn on automatically. The indicator on the TV lights up amber once you set the "Wake Up Timer". You can also cancel "Sleep Timer" and "Wake Up Timer" by turning off the TV's main power. ⷠIf no buttons or controls are pressed for more than one hour after the TV is turned on using the "Wake Up Timer", the TV automatically goes into standby mode. [. . . ] If you want to skip this program number when using PROG +/­, you can select the "Skip" feature. (1) Press V or v to select "Skip", then press (2) Press V or v to select "On", then press To cancel, select "Off", then press . The "Setup" menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment and select the color system. Adjust the picture position when it is not aligned with the TV screen. [. . . ]