User manual SONY KV-28EW20B

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] Input three digits for the page number using the numbered buttons on the control. If you make a mistake, type in any three digits then re-enter the correct page number. Selecting the next or preceding page Press the or buttons on the remote control to select the previous or next page. Selecting a sub page A teletext page may consist of several sub pages. In this case an information line is displayed, showing the number of subpages. Using colour buttons to access pages (Fastext) (only available if the TV station broadcasts Fastext signals) When the colour coded menu appears at the bottom of a page, press a coloured button on the remote control (green, red, yellow or blue) to access the corresponding page. using the feature `Page Catching' 1. Press the numbered buttons on the remote control to select a teletext page which has several page numbers on it (eg the index page). Press v or V to select your chosen item on the screen then press B to display the relevant sub menu. Top/Bottom/Full The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page. Once the text page has been found a blue symbol appears in the top left corner of the screen. From your sitting position all volume levels should be the same. In Smart, Zoom and 14:9 modes parts of the top and bottom of the screen are cut off. Press v or V to adjust the position of the image on screen (eg to read subtitles) then press the OK button to confirm. You can manually select which channel you wish to watch, either full-screen or in the PIP mode. Press the OK button again to display the selected channel or press mode from the TV screen. This PAP feature divides the screen into two for watching two channels simultaneously (with a video source on one if you want). The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones. Switching PAP on and off Press once to display the screens and twice to switch PAP off. Selecting sound for the headphones With PAP switched on, refer to the `Adjusting the picture and sound' section of this manual and set `i Dual Sound` to `PAP'. Zooming the screens Press the b or B buttons to change the size of the two screens. After tuning the TV, you can use this feature to change the order of the channels on the TV. [. . . ] Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR1 Beta VCR VTR2 8mm VCR VTR3 VHS VCR VTR4 Digital Video (DCR-VX 1000/9000E, VHR-1000) DVD Digital Video Disk 3. use the buttons on the remote control to operate the equipment. * * If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control. [. . . ]