User manual SONY KV-28EW20E

[. . . ] Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations. To prevent fire or shock hazard, do not expose the TV to rain or moisture. Do not plug in too many appliances to the same power socket. Install the TV on a stable TV stand and floor which can support the TV set weight. [. . . ] This menu will not appear again the next time you turn on the TV by pressing !To allow this menu to appear again, select "Yes", then press t. You can immediately go to the end of the "Initial Setup" menu by pressing MENU. You can also set up your TV by pressing the MENU button on the top control panel for about five seconds or using the menu system (see page 11). Description Turn off temporarily or turn on the TV. * When the "Personal" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu (see page 15). * When the "Personal" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu (see page 14). The MENU button lets you open a menu and change the settings of your TV. the following is an overview of the menu system. Picture icon Sound icon Timer icon Channel Setup icon Setup icon Menu level 1 Return icon Name of the current menu Menu level 3 Menu level 2 Level 3/Function Select the picture mode: "Dynamic" t "Standard" t "Soft" t "Personal" "Picture Adjustment" Adjust the "Personal" option: "Picture" t "Brightness" t "Color" t "Hue" t "Sharpness" t "Reset" "Color Temperature" Adjust white color tint: "Cool" t "Neutral" t "Warm" "Intelligent Picture" Optimize picture quality: "On" t "Off" "Sound" Select the sound mode: "Mode" (KV-28EW20E only) "Dynamic" t "Drama" t "Soft" t "Personal" "Sound Adjustment" Adjust the "Personal" option: (KV-28EW20E only) "Treble" t "Bass" t "Reset" Select to emphasize the left and right speakers. Level 1 "Timer" Level 2 "Sleep Timer" "Wake Up Timer" "Channel Setup" "Auto Program" "Manual Program" "TV System" "Program Label" "Program Block" "Setup" "Language" "Video Label" "Color System" Level 3/Function Set TV to turn off automatically. Press V or v to select either "B/G", "I", "D/K" or "M", then press . Press V or v to select the program number, then press (2) Select "Label" and press , then press V or v to select alphanumeric characters for the label. Press V or v to select the program number, then press . (2) Select "Block" and press , then press V or v to choose either "On" or "Off". If you preset a blocked program number, that program number will be unblocked automatically. During automatic channel presetting, your TV screen will indicate "B/G", "I", "D/K" or "M" for the "TV System". After selecting "Manual Program", select the program number to which you want to preset a channel. (1) Make sure "Program" is selected, then press . (2) Press V or v until the program number you want to preset appears on the menu, then press . (1) Make sure either "VHF Low", "VHF High" or "UHF" is selected, then press . (2) Press V or v until the desired channel's broadcast appears on the TV screen, then press . [. . . ] (main power) on the TV to turn off the TV for about five seconds, then turn it on again. The volume level is too · Do not use a hair dryer or other · There is local equipment near the TV. Interference from cars, neon signs, hair dryers, · Display the "Picture" menu and select "Personal" of "Mode", then adjust the "Color" level in "Picture Adjustment". Keep external speakers or other electrical equipment away from the TV. [. . . ]