User manual SONY KV-28FX66U

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] PROGRAMME LABELS The "Programme Labels" option in the "Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name. With the first element of the Label column highlighted, press or to select a letter or number (select "-" for a blank), then press to confirm this character. AV PRESET The "AV Preset" option in the "Set Up" menu allows you to designate a name to the external equipment you have connected to the input sockets of this TV. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1, AV2 and AV3 are for the rear Scarts and AV4 for side connectors). 2 A label automatically appears in the label column: a) If you want to use one of the 6 predefined label (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. Press or to select which programme number you want to preset the channel on (for VCR, select programme number "0"). One to the programme order of your choice. Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . [. . . ] This characteristics is inherent to RF signals, and does not indicate malfunction. Design and specifications are subject to change without notice. Here are some simple solutions to problems which may affect the picture and sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings. [. . . ]