User manual SONY KV-28FX68E

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] To cancel this function, select "Off" instead of "AUTO". SOUND ADJUSTMENT The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press . Then press / / or repeatedly to adjust it and finally press OK to store the new adjustment. Enhances clarity, detail and presence of sound by using "BBE High Definition Sound system"*. Dynamic: "BBE High Definition Sound system"* intensifies clarity and presence of sound for better intelligibility and musical realism. Resets the sound to the factory preset levels. Off: volume level changes according to the broadcast signal. On: volume level of the channels will stay the same, independent of the broadcast signal (e. If you are listening to the TV through headphones, the "Effect" option will automatically be switched to "Off". ** This TV has been designed to create the "Dolby Surround" sound effect by simulating the sound of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. To do this: after selecting the option, press and then proceed in the same way as in step 6 b) of the section "Switching On the TV and Automatically Tuning" on page 8. PROGRAMME LABELS The "Programme Labels" option in the "Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Skip any unwanted programme numbers when they are selected with the PROG +/buttons. to do this: Highlighting the Programme option , press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. If this is the case, you can correct the pictures slant by using the "Picture Rotation" option in the "Detail Set Up" menu. [. . . ] Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily. Turn on your VCR or DVD and check that the main functions work. â· If your device is not working or some of the functions do not work please check that you entered the correct code set or try the next code listed against the brand. [. . . ]