User manual SONY KV-29CL11B

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. ⷠThe component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/ PR, Y/Cb/Cr or Y/B-Y/R-Y. ⷠIf you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not be output properly. Description Turn off temporarily or turn on the TV. Jump to last program number that has been watched for at least five seconds. For program numbers 10 and above, enter the second digit within two seconds. Select sound mode options with a 5-Band Graphic Equalizer display: "Dynamic", "Standard", "Custom"*. * When the "Custom" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (max. notes · Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. ⷠYou may display the settings directly using the SOUND MODE button on the top control button on the remote control (see page 11). Change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs. You can manually preset each FM radio station that can be received in your area and then store the radio frequency of the desired FM radio stations. Searching stops automatically when a station is tuned in. If the station has a weak signal, press B or b to fine tune the radio frequency manually, then press to store the FM radio station. (4) Repeat steps (1) through (3) to preset other FM radio stations. * The "FM Radio Setup" feature is only available in FM Radio mode. To enable this feature, access to FM Radio mode by using WEGA GATE system or pressing the FM button on the top control panel (see page 7), then preset your desired FM radio stations according to the steps mentioned above. If you preset a blocked program number, that program number will be unblocked automatically. ⷠIf you sort a blocked program, that program will remain blocked. [. . . ] Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To display a Teletext page on the TV picture Do this Press . Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. [. . . ]