User manual SONY KV-29CL11K

[. . . ] Do not use old batteries or different types of batteries together. If an unwanted channel has been preset or you cannot preset a particular channel, preset your TV manually (see page 9). note · During automatic channel presetting, the TV screen displays either B/G, I, D/K, or, M for the TV system (see page 8). You can connect optional audio/video components, such as a VCR, multi disc player, camcorder, video game or stereo system. [. . . ] Press PROGR +/­ or the number buttons until the unused or unwanted program number appears. You can also use SELECT and ¸ +/­ on the TV to preset channels and skip program numbers. The fine tuning (FINE) function may help reduce double images and lines moving across the TV screen. (5) Press + or ­ continuously until the picture quality is optimal. This section explains functions used while watching the TV. Most operations can be done using the remote. To Turn off temporarily Turn off completely Mute the sound Watch the video input (VCR, camcorder, etc. ) Jump back to the previous channel Display the on-screen information* Adjust the volume of each TV program automatically Adjust the picture position when it is not aligned to the TV screen Press u. SELECT repeatedly until "INTELLIGENT VOL" appears, then press + or ­ to select "ON. " SELECT repeatedly until "PIC ROTATION" appears, then press + or ­ to adjust the alignment of the picture position. * The picture, sound, and either the program number or video mode are displayed. You can change the favorite channel setting as well. When you use the FAVORITE CH feature for the first time, six preset channels will appear. Press + or ­ to select the favorite channel you want to change (e. Repeat steps 2 and 3 to set other favorite channels. You can prevent children from watching certain programs by using the buttons on the remote control. If you preset a locked channel, that particular channel will be unlocked. If you have any problem while viewing your TV, please check the following troubleshooting guide. Press SELECT until "MANUAL PROGRAM" appears on the screen, then preset the channel again. If the sound of all the channels are · The TV system setting or noisy, check the TV system (TV SYS) channel presetting is setting (page 9), then press AUTO inappropriate or PROGR to preset the channels again incomplete. If the sound of some channels are noisy, select the channel, then select the appropriate TV system (TV SYS) (page 9). The power cord, antenna or VCR is not connected. [. . . ] The u indicator on your TV flashes red once or more in intervals of 3 seconds. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. A small "boom" sound is heard when the TV is turned on. Your TV is equipped with a self-diagnosis function. [. . . ]