User manual SONY KV-29FQ85E

[. . . ] â· To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. [. . . ] * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (Wake Up Timer) (max. The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than three hours after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. (Sleep Timer) Set TV to turn off automatically according to the desired period of time (max. If there is no Teletext broadcast, only "100" is displayed at the top left corner of the screen. Enter the Teletext page number that you want to refer to, then press . When the page number is displayed, press to show the text. (red , green , Access the corresponding colored FASTEXT menu. The FASTEXT yellow, blue) feature can be used only when the FASTEXT broadcast is available. You are able to listen to the FM radio stations using your TV by connecting an antenna (see F). Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it off, disconnnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval). The TV screen sometimes goes blank for slightly longer than usual during channel change. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. A small "boom" sound is heard when the TV is turned on. How to use WEGA GATE (2) Press (or b) to confirm your selection or go to the next level. When a feature is dimmed in the menu, it is not selectable. Buttons on the front panel can also be used for Make sure the "Picture" icon ( ) is selected, then press . Press V or v to select "On", then press To cancel, select "Off", then press . "Intelligent Picture Signal Level" indicator will be displayed, followed by picture improvement when you change the program number or the input mode. * You can adjust the setting to your personal preference in the "Picture Adjustment", "Color Temperature" and "VM" options only when the "Custom" mode is selected. [. . . ] (3) To block unwanted program number, press V or v to select . (e) Repeat step (b) to (d) if you wish to change other channels. You can manually preset each FM radio station that can be received in your area and then store the radio frequency of the desired FM radio stations. Searching stops automatically when a station is tuned in. [. . . ]