User manual SONY KV-29FQ85K

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] To correct the letter, select "%" on the screen to go back and press OK. AV PRESET This option allows you to: a) Designate a name to the external equipment you have connected to the input sockets of the TV set. To do this: Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press v or V to select the input source you wish to name: AV1, AV2 or AV3 for the rear Scarts and AV4 for front connectors. A label automatically appears in the label column: a) If you want to use one of the predefined labels, press v or V to select the desired label and finally press OK. the total predefined labels are: VIDEO , DVD , CABLE , GAME , CAM (camcorder) or SAT (satellite). B) If you want to set a different label, select Edit and press OK. Then, with the first element highlighted, press v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word "End" on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. To do this: Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option press OK, then press v or V to select the input source you want to alter the input sound level: AV1, AV2 or AV3 for the rear Scarts and AV4 for front connectors. Next press twice b to highlight the Sound Offset column. Finally press OK and v or V to alter the input sound level between -9 and +9. A) Preset channels or the VCR channel one by one to the programme order of your choice. 1 Once you have entered the "Set Up"menu as it is explained on page 16 and after selecting the "Manual Press v or V to select which programme number you want to preset the channel on (for VCR, select programme number "0"). The following option is only available depending on the country you have selected in the "Country" menu. Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press b and v or V to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: Once you have entered the "Set Up"menu as it is explained on page 16 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/- button to select the programme number with the channel you wish to name. [. . . ] "Reset" to return to the factory settings (see page 11). No picture or no menu information from equipment connected to the Scart connector. Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen (see page 23). Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to factory settings (see page 11). [. . . ]