User manual SONY KV-29FX201E

[. . . ] If you prefer Chinese to English, you can change the menu language. You can use buttons on both the remote commander and the TV. Press + or ­ to move the cursor (z) to the fourth line from the top (" /LANGUAGE"). To switch off the TV completely, press POWER. [. . . ] If the power on the TV is turned off in standby mode, the STANDBY indicator may remain alight for a while. When the TV is in standby mode after pressing POWER, press POWER on the remote commander. To select a two-digit channel, press "-/- -" before the number buttons. To scan through channels Press PROGR/PAGE +/­ until the channel you want appears. You can set the TV to turn off automatically after the period of time you set. Display more contrast picture Display normal contrast picture Display picture suitable for movies and video games Display the picture that is adjusted using ADJUSTMENT Make specific adjustments. To cancel the Sleep Timer, press SLEEP/INDEX repeatedly until "SLEEP OFF" appears, or turn the TV off. You can adjust the picture to your own taste with the ADJUSTMENT option. If the color of the picture is abnormal When receiving programs through the terminal: Press TV SYSTEM or COLOR SYSTEM until the color becomes normal. Press + or ­ to move the cursor (z) to the item you want to adjust, and press ENTER. Increase picture contrast Increase color intensity Brighten the picture Make skin tones become greenish Sharpen the picture Decrease picture contrast Decrease color intensity Darken the picture Make skin tones become reddish Soften the picture To adjust other items, repeat steps 4 and 5. A Teletext page may consist of several subpages. You can stop the page scrolling in order to read the text at your own pace. Each time you press TEXT, the screen changes as follows: Sometimes pages contain concealed information, such as an answer to a quiz. Each time you press A/B/ENLARGE, the Teletext display changes as follows: Enlarge n upper half n Enlarge n Normal size lower half When receiving the signal conforming to wide mode (S1-Video signal), you can change the size of the picture on the screen. Press + or ­ to select the wide mode to suit the size of the picture you want to display on the TV screen. Display the picture on the screen in wide mode Display the picture on the screen in wide mode automatically when receiving the S1-Video signal through the S1-Video input jack Display the picture on the screen in conventional size When the picture is in wide mode, the bright lines which are used for adjusting the CRT at optimum level appear at the top of the screen. You can select the output signal from the MON/TV OUT jacks at the rear of the TV. You can enjoy a surround sound effect that is like being in a music hall when receiving stereo signals. Press + or ­ to turn the surround sound on or off, and press ENTER. Output the signal of the picture you are watching as a monitor. Listen to surround sound that is effective for stereo signals Listen to surround sound that is effective for monaural signals Turn off surround sound Do not change the channel while recording with a VCR through the MON/TV OUT jacks. [. . . ] Listen to surround sound that is effective for stereo signals Listen to surround sound that is effective for monaural signals Turn off surround sound Do not change the channel while recording with a VCR through the MON/TV OUT jacks. If you change the channel, it also changes the channel you are recording. Reducing the noise of the picture You can reduce the noise level of the picture when the TV receives a weak signal or when you play a videotape that is in poor condition. P KV-F29MN11/F29MH11 only You can adjust the tilt of the picture if it is not aligned to the TV screen. [. . . ]