User manual SONY KV-29FX20E

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] ⷠThe component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/ PR, Y/Cb/Cr or Y/B-Y/R-Y. ⷠIf you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not be output properly. Description Turn off temporarily or turn on the TV. Jump to last program number that has been watched for at least five seconds. For program numbers 10 and above, enter the second digit within two seconds. Select sound mode options with a 5-Band Graphic Equalizer display: "Dynamic", "Standard", "Custom"*. * When the "Custom" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (max. Indicator on TV lights up amber once you set The the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Custom". notes · Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. ⷠYou may display the settings directly using the SOUND MODE button on the top control panel (see page 7) or button on the remote control (see page 10). Change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs. If you preset a blocked program number, that program number will be unblocked automatically. ⷠIf you sort a blocked program, that program will remain blocked. After selecting "Manual Program", select the program number to which you want to preset a channel. (1) Make sure "Program" is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press . (1) Make sure either "VHF Low", "VHF High" or "UHF" is selected, then press . (2) Press V or v until the desired channel's broadcast appears on the TV screen, then press . [. . . ] ⷠIf no button is pressed for three minutes, the beeping sound will automatically go off. Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. [. . . ]