User manual SONY KV-29FX64E

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] You can use the buttons on the remote to view Teletext. Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. If there is no Teletext broadcast, "100" is displayed at the top left corner of the screen. Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. X (red, green, yellow, blue) Stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . a TV program (2) When the page number is displayed , press to show the text. Select a FASTEXT menu or the colored boxes turn off Teletext Press x (red, green, yellow and blue) that corresponds to the desired menu or page number. The FASTEXT feature can be used only when the FASTEXT broadcast is available. The MENU button lets you open a menu and change the settings of your TV. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Personal". Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. â· You may display the settings directly using the SOUND MODE button on the top control panel (see page 8) or button on the remote control (see page 10). The "Timer" menu allows you to set TV to turn off and turn on automatically. After the selected length of time, the TV hours), then press switches on automatically and "Wake Up Timer" will appear on the screen. The indicator on the TV lights up amber once you set the "Wake Up Timer". You can also cancel "Sleep Timer" and "Wake Up Timer" by turning off the TV's main power. â· If no buttons or controls are pressed for more than one hour after the TV is turned on using the "Wake Up Timer", the TV automatically goes into standby mode. The "Channel Setup" menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press V or v to select either "B/G", "I", "D/K" or "M" then press . [. . . ] Enjoy the sound of audio equipment through the TV speakers while viewing picture from other inputs. Press V or v to select the input connected to your audio equipment: "Video1" or "Video2", then press . You may change the picture while listening to the fixed audio input. You can enjoy high quality sound by connecting the TWEETER. [. . . ]