User manual SONY KV-29LS30U

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. After all available broadcast channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the broadcast channels appear on the screen. If you wish to keep the broadcast channels in the tuned order, go to step 7. If you wish to store the broadcast channels in a different order: 1 Press the or button to select the programme number with the broadcast channel you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected broadcast channel, then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other broadcast channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Personal (for individual settings). Select Reset and press OK to reset the picture to the factory preset levels. SOUND ADJUSTMENT The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press . Then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also contains two submenus as following: Mode Personal (for individual settings) Rock Pop Jazz Sound Effect: Auto volume: Off: Normal. Off: On: Volume level changes according to the broadcast signal. Volume level of the channels will stay the same, independent of the broadcast signal (e. Select Reset and press OK to reset the sound to the factory preset levels. â· In case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel 2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono. SLEEP TIMER The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max. [. . . ] For more information on Smartlink, please refer to the instruction manual of your VCR. If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart :2/q F. Plug in your Hi-Fi equipment to the audio output sockets E if you wish to amplify the audio output from TV. The audio level of the external speakers can be modified by pressing the volume buttons on the remote control. [. . . ]