User manual SONY KV-29LS60E

[. . . ] Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations. Do not plug in too many appliances to the same power socket. Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. [. . . ] * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (Wake Up Timer) (max. The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Set TV to turn off automatically according to the desired period of time (max. If there is no Teletext broadcast, only "100" is displayed at the top left corner of the screen. Enter the Teletext page number that you want to refer to, then press . When the page number is displayed, press to show the text. (red , green , Access the corresponding colored FASTEXT menu. The FASTEXT yellow, blue) feature can be used only when the FASTEXT broadcast is available. If you find any problem while viewing your TV, you can either use the "Factory Settings" function (see L) or check the Troubleshooting guide below. "Intelligent Picture Signal Level" indicator will be displayed, followed by picture improvement when you change the program number or the input mode. * You can adjust the setting to your personal preference in the "Picture Adjustment" and "Color Temperature" options only when the "Custom" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . Selecting "Reset" will set your TV to the factory settings. Press V, v, B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items. The adjusted settings will be received when you select "Custom". Reducing "Sharpness" can also reduce picture noise. * You can adjust the setting to your personal preference in the "Sound Adjustment" option only when the "Custom" mode is selected. The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Custom" mode in the menu. Make sure that "Adjust" is selected, then press Selecting "Reset" will set your TV to the factory settings. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . [. . . ] (2) Press V or v to select either "Off" (for picture distorted; picture with lines; signal interference) or "Auto" (for snowy picture), then press . Press V or v to select either "English" or " then press . Adjust the picture position when it is not aligned with the TV screen. Press B or b to adjust the picture position, then press . [. . . ]