User manual SONY KV-32CS70K

[. . . ] When an alternative type of plug is used it should be fitted with a 5 AMP fuse, otherwise the circuit should be protected by a 5 AMP fuse at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. [. . . ] Once you have selected your desired option, press OK to store. If you have selected "One time off" or "Permanent off", the volume of the external equipment can also be altered by pressing the 2 +/- buttons of the remote control. When the volume buttons are pressed, the symbol % will appear indicating that the volume you are altering is not the volume of the TV set speakers, it is from the external equipment. headphones Set Up This option allows you to customise the headphones volume and the PAP settings (refer to page 19 for details on PAP). If you proceed in this way, you will get the optimum picture settings related to the optional equipment. 1 Once you have entered the "Features" menu as explained in the previous page and after selecting the option, press OK. Next press v or V to chose the equipment you want to connect among the available: SAT (satellite), Decoder, DVD, GAME, VIDEO or DVD rec. Next press b to select the equipment chosen (equipment selected also can be deleted by pressing B). 2 A new menu will appear showing you on which Scart connector on the rear of the TV should be connected to each equipment. Please connect each equipment according to this information to obtain the optimum picture setting of the optional equipment. 3 Once you have connected the optional equipment, press B or b to select "OK" and finally press the OK button of the remote control. To do this: After selecting the option, press OK and then proceed in the same way as in the step 8 of the section "Switching On the TV and Automatically Tuning" on page 9. PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: 1 Once you have entered the "Set Up" menu as explained in the previous page and after selecting the option, press OK, then press v or V to select the programme number with the channel you wish to name. With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, then press OK. When you have finished, press v, V, B or b to select the word "End" on the screen and finally press OK to remove the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. AV PRESET This option allows you to: a) Designate a name to the external equipment you have connected to the input sockets of the TV set. To do this: 1 Once you have entered the "Set Up" menu as explained in the previous page and after selecting the option, press OK, then press v or V to select the input source you wish to name: AV1, AV2 or AV3 for the rear Scarts and AV4 for front connectors. A label automatically appears in the label column: a) If you want to use one of the predefined labels, press v or V to select the desired label and finally press OK. the total predefined labels are: VIDEO , DVD , CABLE , GAME , CAM (camcorder) or SAT (satellite). B) If you want to set a different label, select Edit and press OK. [. . . ] Sony will endeavour to update the software according to market changes. Therefore, please refer to the code table included with the remote control for latest code set. A small label is added inside the battery door to allow you to record your brand codes. Press and hold the t button of the remote control for approximately 6 seconds until the green AUX light of the Media Selector starts flashing (see fig. [. . . ]