User manual SONY KV-32FQ70B

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] Speed Press V to select `Speed' then press the OK button repeatedly to select between `SP' for standard play or `LP' for longplay. With longplay you can record twice as much on a videotape. VCR Setup Press V to select `VCR Setup' then press the OK button repeatedly to select which VCR you wish to programme, namely `VCR1' or `VCR2'. Finally, press B to select the icon then press the OK button to remove the menu from the TV screen. The index page of the teletext service (usually page 100) gives you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors. Select the TV channel which carries the teletext service you want to view. The screen is divided in two, with the TV channel in the right corner and the Teletext display on the left. in P&T mode press then press PROGR+/- to change the channel of the TV screen. Press b or B to change the size of the TV screen then press again to resume normal teletext reception. Input three digits for the page number using the numbered buttons on the remote control. Zooming the screens Press the b or B buttons to change the size of the two screens. These displays will help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to rearrange the TV channels etc. Adjusting the picture and sound The picture and sound are preset at the factory. You can however adjust them to suit your own taste. Press the v or V buttons to select for picture settings or for sound settings then press B to enter either the `Picture Adjustment' menu or the `Audio Adjustment' menu. Press the v or V buttons to select the item on the screen you wish to adjust then press B to confirm. As soon as you have adjusted the item, press the OK button to store the new setting. Repeat steps 3-5 if you wish to adjust any of the other items. After tuning the TV, you can use this feature to change the order of the channels on the TV. Symbol on the menu screen then press B to enter the `Set Up' Press the V button to select `Programme Sorting' then press B to enter the `Programme Sorting' menu. Press the v or V buttons to select the channel you want to move then press B to confirm. [. . . ] Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR1 Beta VCR VTR2 8mm VCR VTR3 VHS VCR VTR4 Digital Video (DCR-VX 1000/9000E, VHR-1000) DVD Digital Video Disk 3. use the buttons on the remote control to operate the equipment. * * If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control. [. . . ]