User manual SONY KV-32FQ70K

[. . . ] Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] If you have connected a decoder to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the "AV3 Output" to "AUTO" or "TV" for correct unscrambling. PIP INPUT The "PIP Input" option in the "Features" menu allows you to select the source you want to watch in the "PIP" screen. To watch the "PIP" screen with the selected source, press the button on the remote control. PIP POSITION The "PIP Position" option in the "Features" menu allows you to change the position of the "PIP" screen within the main screen. LANGUAGE/COUNTRY The "Language/Country" option in the "Set Up" menu allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set. To do this: after selecting the option, press and then proceed in the same way as in steps 2 and 3 of the section "Switching On the TV and Automatically Tuning" on page 7. AUTO TUNING The "Auto Tuning" option in the "Set Up" menu allows you to automatically search for and store all available TV channels. If you do not know the channel number, press or to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Skip any unwanted programme numbers when they are selected with the PROG +/buttons. to do this: Highlighting the Programme option , press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . [. . . ] Design and specifications are subject to change audio outputs (Left/ without notice. Here are some simple solutions to problems which may affect the picture and sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings (see page 9). â· Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen (see page 21). [. . . ]