User manual SONY KV-32FQ86U

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS T 1362 (i. [. . . ] A new menu appears on the screen in which you can assign the connections according to your preferences. If this is the case, you can correct the pictures slant by using this option. To do this: Once you have entered the "Features" menu as explained in the previous page and after selecting the option, press OK. Then press v or V to correct any slant of the picture between -5 and +5. rGB CENTRING This option is only available if an RGB source has been connected to the TV. This option allows you to readjust the horizontal position of the picture in case you need to do it when connecting an RGB source. To do this: Once you have entered the "Features" menu as explained in the previous page and while watching an RGB source select the "RGB Centring" option and press OK. Then press v or V to adjust the centre of the picture between ­5 and +5. 100Hz MODE This option allows you to choose the best setting to view moving images. To do this: Once you have entered the "Features" menu as it is explained in the previous page, select this option and press OK. Although this is the most ideal setting to produce smooth images and to reduce any blurring that may appear with some moving images, depending on your own preference, this option can be altered. Press v or V to select Digital Plus (Advanced 100Hz Digital Plus) and finally press OK to store your selection. The "Set Up" menu allows you to alter various options on this TV. To do this: Press the MENU button and press v three times to select , then press OK to enter this menu. next press v or V to select the desired option and press OK. Finally read the instructions below on how to operate each option. LANGUAGE This option allows you to select the language that menus are displayed in. To do this: After selecting the option, press OK and then proceed in the same way as in step 2 of the section "Switching On the TV and Automatically Tuning" on page 8. AUTO TUNING This option allows you to automatically search for and store all available TV channels. To do this: After selecting the option, press OK and then proceed in the same way as in the steps 6 and 7 of the section "Switching On the TV and Automatically Tuning" on page 9. PROGRAMME SORTING This option allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press OK and then proceed in the same way as in the step 8 of the section "Switching On the TV and Automatically Tuning" on page 9. [. . . ] While the AUX light is flashing, enter the 3 digit code for your device (see the list on the following page) using the number buttons on the remote control (see fig. If your selected code is entered correctly, the green AUX light will be lit momentarily (see fig. 3), otherwise repeat all the above steps. Turn on your device and check that the main functions work (see the table on the following page to check the main functions according to each equipment) · If your device is not working or some of the functions do not work please check that you entered the correct code. [. . . ]