User manual SONY KV-32FX20U

[. . . ] A molded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Press the UP or DOWN arrow keys to select the channel you want to move then press the OK button to confirm. Press the UP or DOWN arrow keys to select the new programme position (eg PROG 4) for your selected channel then press the OK button to confirm. The selected channel now moves to its new programme position and the other channels move accordingly. Repeat steps 4 and 5 if you wish to sort other channels. Although the picture is adjusted at the factory, you can modify it to suit your own taste. Press the UP or DOWN arrow key on the remote control to select the symbol on the menu screen then press the RIGHT arrow key to enter the `PICTURE CONTROL' menu. Press the UP or DOWN arrow keys to select the item on the screen you wish to adjust then press the RIGHT arrow key to confirm. If you selected `Picture Mode' or `Format' in step 3, press the UP or DOWN arrow keys to select the item on the screen you wish to adjust then press the RIGHT arrow key to confirm. Press the RIGHT or LEFT arrow keys to adjust your selected item. As soon as you have adjusted the item, press the OK button to store the new setting. If you selected `Picture Mode' or `Format' in step 3, press the LEFT arrow key to return to the `PICTURE CONTROL' menu. Repeat steps 3-7 to adjust the other items. Picture Mode Picture Modeb B Brightness* Colour* Sharpness* Hue** Contrast Reset Format Format Scroll Auto 16:9 Resets picture to factory preset levels (refer to page 14 for details) B Off b On Personal (for individual settings) Movie (for films) Live (for live broadcasts) Changing picture and sound modes quickly You can quickly change the Picture Mode or the Equalizer Mode without entering the `PICTURE CONTROL' or the `SOUND CONTROL' menu screens. Although the sound is adjusted at the factory, you can modify it to suit your own taste. Press the UP or DOWN arrow key on the remote control to select the symbol on the menu screen then press the RIGHT arrow key to enter the `SOUND CONTROL' menu. Press the UP or DOWN arrow keys to select the item on the screen you wish to adjust then press the RIGHT arrow key to confirm. If you selected `Sound Mode' in step 3, press the UP or DOWN arrow keys to select the item on the screen you wish to adjust then press the RIGHT arrow key to confirm. Press the RIGHT or LEFT arrow keys to adjust your selected item. As soon as you have adjusted the item, press the OK button to store the new setting. If you selected `Sound Mode' in step 3, press the LEFT arrow key to return to the `SOUND CONTROL' menu. Repeat steps 3-7 to adjust the other items. Resets picture to factory preset levels Using this Screen Mode feature you can change the aspect ratio of the screen. [. . . ] The output level from the E sockets can be varied by adjusting the volume of the headphones (refer to the `Adjusting the sound' section of this manual). For mono equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 3 input signal using the instructions on this page. Finally, refer to the `Adjusting the sound' section of this manual and select `A' on the sound menu screen. Press the DOWN arrow key to select the symbol on the menu screen then press the RIGHT arrow key to enter the `VIDEO CONNECTION' menu screen. [. . . ]