User manual SONY KV-32FX66K

[. . . ] Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] One to the programme order of your choice. Press or to select which programme number you want to preset the channel on (for VCR, select programme number "0"). The following option is only available depending on the country you have selected in the "Language/Country" menu. Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Skip any unwanted programme numbers when they are selected with the PROG +/buttons. to do this: Highlighting the Programme option , press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. View and record scrambled channels when using a decoder connected to Scart 3/ S 3 directly or through a VCR. This option is only available depending on the country you have selected in the "Language/Country" menu. [. . . ] â· Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to factory settings. â· This is not a malfunction. Poor or no picture (screen is dark), but good sound. [. . . ]